PowerShell Logo Small


This is the built-in help made by Microsoft for the document 'about_Command_Syntax', in PowerShell version 5 - as retrieved from Windows version 'Microsoft Windows Server 2012 R2 Standard' PowerShell help files on 2016-06-24.

For PowerShell version 3 and up, where you have Update-Help, this command was run just before creating the web pages from the help files.

Search powershellhelp.space


Describes the syntax diagrams that are used in Windows PowerShell.

The Get-Help and Get-Command cmdlets display syntax diagrams to help
you construct commands correctly. This topic explains how to interpret
the syntax diagrams.

Syntax Diagrams
Each paragraph in a command syntax diagram represents a valid form
of the command.

To construct a command, follow the syntax diagram from left to
right. Select from among the optional parameters and provide values for
the placeholders.

Windows PowerShell uses the following notation for syntax diagrams.

<command-name> -<Required Parameter Name> <Required Parameter Value>
[-<Optional Parameter Name> <Optional Parameter Value>]
[-<Optional Switch Parameters>]
[-<Optional Parameter Name>] <Required Parameter Value>

The following is the syntax for the New-Alias cmdlet.

New-Alias [-Name] <string> [-Value] <string> [-Description <string>]
[-Force] [-Option {None | ReadOnly | Constant | Private | AllScope}]
[-PassThru] [-Scope <string>] [-Confirm] [-WhatIf] [<CommonParameters>]

The syntax is capitalized for readability, but Windows PowerShell is

The syntax diagram has the following elements.

Command name
Commands always begin with a command name, such as New-Alias. Type the
command name or its alias, such a "gcm" for Get-Command.

The parameters of a command are options that determine what the command
does. Some parameters take a "value," which is user input to the command.

For example, the Get-Help command has a Name parameter that lets you
specify the name of the topic for which help is displayed. The topic
name is the value of the Name parameter.

In a Windows PowerShell command, parameter names always begin with a
hyphen. The hyphen tells Windows PowerShell that the item in the command
is a parameter name.

For example, to use the Name parameter of New-Alias, you type the following:


Parameters can be mandatory or optional. In a syntax diagram, optional
items are enclosed in brackets ([ ]).

For more information about parameters, see about_Parameters.

Parameter Values
A parameter value is the input that the parameter takes. Because Windows
PowerShell is based on the Microsoft .NET Framework, parameter values are
represented in the syntax diagram by their .NET type.

For example, the Name parameter of Get-Help takes a String value, which
is a text string, such as a single word or multiple words enclosed in
quotation marks.

[-Name] <string>

The .NET type of a parameter value is enclosed in angle brackets (< >)
to indicate that it is placeholder for a value and not a literal
that you type in a command.

To use the parameter, replace the .NET type placeholder with an object
that has the specified .NET type.

For example, to use the Name parameter, type "-Name" followed by a string,
such as the following:

-Name MyAlias

Parameters with no values
Some parameters do not accept input, so they do not have a parameter
value. Parameters without values are called "switch parameters"
because they work like on/off switches. You include them (on) or you
omit them (off) from a command.

To use a switch parameter, just type the parameter name, preceded by a hyphen.

For example, to use the WhatIf parameter of the New-Alias cmdlet, type the following:


Parameter Sets
The parameters of a command are listed in parameter sets. Parameter sets
look like the paragraphs of a syntax diagram.

The New-Alias cmdlet has one parameter set, but many cmdlets have multiple
parameter sets. Some of the cmdlet parameters are unique to a parameter set,
and others appear in multiple parameter sets.

Each parameter set represents the format of a valid command. A parameter
set includes only parameters that can be used together in a command. If

parameters cannot be used in the same command, they appear in separate
parameter sets.

For example, the Get-Random cmdlet has the following parameter sets:

Get-Random [[-Maximum] <Object>] [-Minimum <Object>] [-SetSeed <int>]

Get-Random [-InputObject] <Object[]> [-Count <int>] [-SetSeed <int>]

The first parameter set, which returns a random number, has the Minimum
and Maximum parameters. The second parameter set, which returns a randomly
selected object from a set of objects, includes the InputObject and Count
parameters. Both parameter sets have the Set-Seed parameter and the common

These parameter sets indicate that you can use the InputObject and Count
parameters in the same command, but you cannot use the Maximum and Count
parameters in the same command.

You indicate which parameter set you want to use by using the parameters
in that parameter set.

However, every cmdlet also has a default parameter set. The default parameter
set is used when you do not specify parameters that are unique to a parameter
set. For example, if you use Get-Random without parameters, Windows PowerShell
assumes that you are using the Number parameter set and it returns a random number.

In each parameter set, the parameters appear in position order. The order of
parameters in a command matters only when you omit the optional parameter names.
When parameter names are omitted, Windows PowerShell assigns values to
parameters by position and type. For more information about parameter position,
see about_Parameters.

Symbols in Syntax Diagrams
The syntax diagram lists the command name, the command parameters, and the
parameter values. It also uses symbols to show how to construct a valid

The syntax diagrams use the following symbols:

-- A hyphen (-) indicates a parameter name. In a command, type the hyphen
immediately before the parameter name with no intervening spaces, as
shown in the syntax diagram.

For example, to use the Name parameter of New-Alias, type:


-- Angle brackets (<>) indicate placeholder text. You do not type the
angle brackets or the placeholder text in a command. Instead, you replace
it with the item that it describes.

Angle brackets are used to identify the .NET type of the value that
a parameter takes. For example, to use the Name parameter of the New-Alias
cmdlet, you replace the <string> with a string, which is a single word or a
group of words that are enclosed in quotation marks.

-- Brackets ([ ]) indicate optional items. A parameter and its value can be
optional, or the name of a required parameter can be optional.

For example, the Description parameter of New-Alias and its value are
enclosed in brackets because they are both optional.

[-Description <string>]

The brackets also indicate that the Name parameter value (<string>) is
required, but the parameter name, "Name," is optional.

[-Name] <string>

-- A right and left bracket ([]) appended to a .NET type indicates that
the parameter can accept one or multiple values of that type. Enter the
values in a comma-separated list.

For example, the Name parameter of the New-Alias cmdlet takes only
one string, but the Name parameter of Get-Process can take one or
many strings.

New-Alias [-Name] <string>

New-Alias -Name MyAlias

Get-Process [-Name] <string[]>

Get-Process -Name Explorer, Winlogon, Services

-- Braces ({}) indicate an "enumeration," which is a set of valid values
for a parameter.

The values in the braces are separated by vertical bars ( | ). These bars
indicate an "exclusive or" choice, meaning that you can choose only
one value from the set of values that are listed inside the braces.

For example, the syntax for the New-Alias cmdlet includes the following
value enumeration for the Option parameter:

-Option {None | ReadOnly | Constant | Private | AllScope}

The braces and vertical bars indicate that you can choose any one of
the listed values for the Option parameter, such as ReadOnly or AllScope.

-Option ReadOnly

Optional Items
Brackets ([]) surround optional items. For example, in the New-Alias
cmdlet syntax description, the Scope parameter is optional. This is
indicated in the syntax by the brackets around the parameter name
and type:

[-Scope <string>]

Both the following examples are correct uses of the New-Alias cmdlet:

New-Alias -Name utd -Value Update-TypeData
New-Alias -Name utd -Value Update-TypeData -Scope global

A parameter name can be optional even if the value for that parameter is
required. This is indicated in the syntax by the brackets around the
parameter name but not the parameter type, as in this example from the
New-Alias cmdlet:

[-Name] <string> [-Value] <string>

The following commands correctly use the New-Alias cmdlet. The commands
produce the same result.

New-Alias -Name utd -Value Update-TypeData
New-Alias -Name utd Update-TypeData
New-Alias utd -Value Update-TypeData
New-Alias utd Update-TypeData

If the parameter name is not included in the statement as typed, Windows
PowerShell tries to use the position of the arguments to assign the
values to parameters.

The following example is not complete:

New-Alias utd

This cmdlet requires values for both the Name and Value parameters.

In syntax examples, brackets are also used in naming and casting to
.NET Framework types. In this context, brackets do not indicate an
element is optional.